Xenetech Professional Engraving Systems

Home About Xenetech Products & Technology Support News Contact
Search:     Advanced search

How to rotary engrave in plastic

Article ID: 313
Last updated: 28 Nov, 2008
Add comment
Comments: 0
Posted: 28 Nov, 2008
by: Rosenstein B.
Updated: 28 Nov, 2008
by: Rosenstein B.
If you are new to rotary engraving and / or plastic rotary engraving, the attached document will show you how.  Plastic engraving is not rocket science and can be learned rather quickly.  There are only 2 major items to know, how deep to engrave your material and what size cutter is to be used.
All of this information is in the attached document below.
Copyright Xenetech 2010. All Rights Reserved.
This article was:   Helpful | Not Helpful Add comment
Attached files
file How to Rotary Engrave in Plastic.pdf (1.13 mb)

Prev   Next
Drilling holes for Raster Braille     How to setup and run a Cylindrical attachment on a 2525 & 2550

RSS