|
The Xenetech Viper 2550 has a 25” by 50” (635mm by 1270mm) engraving area with moving gantry – the motion system moves while the item being engraved remains stationary. It was designed to engrave into plastics (accepts a full sheet of plastic!), wood, and glass for signs, nametags, trophies, awards, tools, industrial parts, identification plates, and panel faces. The 2550 will also engrave, diamond drag and burnish into various metals - aluminum, brass, steel, etc. With its tall clearance of 7.438” (188.9mm) and the optional engraving cylindrical attachment, the 2550 can also engrave cylindrical pieces. It is the largest rotary engraving system and a great solution for high-volume shops, or a great way to plan for growth. The system contains Xenetech’s automatic surface sensing capability that allows for flat, curved, and cylindrial surfaces. Each system includes Xenetech’s professional engraving window-based software—XGW-32, 40 engraving fonts, 2,500 engravable True-Type™ fonts, the new Viper® high productivity electronics (up to 10 ips engraving speed), touch screen keypad and a two year warranty.
Standard 2-year warranty
|
| Features for the XOT 2550. An investment in these Rotary Systems begins with top-of-the-line performance and a wide variety of features and enhancements, including: |
 |
Motor speed control with auto vacuum accessory plug |
 |
Automatic surface sensing, senses every cutter down with an optical proximity sensor |
 |
4 Bearing 20,000 rpm spindle (collet and high speed spindle optional) |
 |
Fully programmable
z-axis with 2" maximum travel allows for greater initial clearance over material surface |
 |
Rotary Cylindrical Attachment available on rotary models: 1313, 1625, 2525 and 2550. This attachment allows engraving on mugs, glasses and other cylindrical items. It can accommodate sizes up to 6.75" (171.5 mm) in diameter and 13.75" (349.2 mm) in length. The fixture is capable of engraving a full 360¡ around an object. Optional 3 Jaw Chuck allows the holding of smaller items like pens, PVC pipe, copper pipe, etc. from .125" (3.18 mm) diameter by 13.75" (349.2 mm)
in length. |
 |
Touch screen keypad: With the Viper Pendant, you have complete, touch-screen access to your engraving system. The hand-held key pad gives you the ultimate control to select jobs from the hard drive, engrave jobs (forward/reverse by character, line, plate, and job), check XYZ positioning and digital readouts, override engraving speeds, program the z axis, record job timing, and more. |
 |
2550 Dual Head with 1625 T-slots and No-slip Timing Belt Dual head available on 912 on up
Table Stand with Locking Casters
Available for 1625, 2525 and 2550 |
|
|
