scroll down to content
Products & TechnologyHow to BuySearch KnowledgebaseRequest More InformationEmail Support
Applications
Samples Gallery
Xenetech Laser & Rotary Engravers
Overviewwhy buy xenetechprotection plans
XOT 1625 Rotary Engraving System

XOT 1625 Defining Features

The Xenetech Viper 1625 has a 16” by 25”  (406.4mm by 635mm) engraving area with high precision and rigidity.  The 1625 will deep engrave, diamond drag and burnish into various metals - aluminum, brass, steel, etc.  It was also designed to engrave into plastics, wood, and glass for signs, nametags, trophies, awards, small jewelry items, tools, industrial parts, identification plates, and panel faces, .  With its tall clearance of 7.188” (182.5mm) and the optional engraving cylindrical attachment, the 1625 can also engrave cylindrical pieces.  It is our leading seller to professional engraving shops, where engraving a broad line of items is important. The system contains Xenetech’s automatic surface sensing capability that allows for flat, curved, and cylindrial surfaces. Each system includes Xenetech’s professional engraving window-based software—XGW-32, 40 engraving fonts, 2,500 engravable True-Type™ fonts, the new Viper® high productivity electronics (up to 10 ips engraving speed), touch screen keypad and a two year warranty.

Standard 2-year warranty

 

Features for the XOT 1625. An investment in these Rotary Systems begins with top-of-the-line performance and a wide variety of features and enhancements, including:
photo Motor speed control with auto vacuum accessory plug
photo Automatic surface sensing, senses every cutter down with an optical proximity sensor
photo 4 Bearing 20,000 rpm spindle (collet and high speed spindle optional)
photo Fully programmable z-axis with 2" maximum travel allows for greater initial clearance over material surface
photo Rotary Cylindrical Attachment available on rotary models: 1313, 1625, 2525 and 2550. This attachment allows engraving on mugs, glasses and other cylindrical items. It can accommodate sizes up to 6.75" (171.5 mm) in diameter and 13.75" (349.2 mm) in length. The fixture is capable of engraving a full 360° around an object. Optional 3 Jaw Chuck allows the holding of smaller items like pens, PVC pipe, copper pipe, etc. from .125" (3.18 mm) diameter by 13.75" (349.2 mm) in length.
Touch screen keypad: With the Viper Pendant, you have complete, touch-screen access to your engraving system. The hand-held key pad gives you the ultimate control to select jobs from the hard drive, engrave jobs (forward/reverse by character, line, plate, and job), check XYZ positioning and digital readouts, override engraving speeds, program the z axis, record job timing, and more.
photo

2550 Dual Head with T-slots and No-slip Timing Belt Dual head available on 912 on up

Table Stand with Locking Casters Available for 1625, 2525 and 2550

Product Support
Product Brochure
Drivers / Downloads / Unlock Software
FAQs
Video
Extended Warranty Information
Knowledge Base Search
Technical Support
 
Why Buy a
Xenetech System?
Follow @XenetechGlobal